2015年9月2日星期三

bonded ndfeb magnet

bonded ndfeb magnet

Our company specializes in the production of bonded ndfeb magnet, and capable for the complete rotor, stator assembly, according to customer demands and drawings.
Features:
a)  Bonded ndfeb magnet is much higher than that of ferrite;
b)  Bonded ndfeb magnet due to a shape, dimensional accuracy better than sintered ndfeb;
c)  Bonded ndfeb magnet is able to be multi-polar magnetic charged;
d)  operating temperature, Tw = 150 Celsius degree;
e)  good corrosion resistance;
bonded ndfeb magnet
bonded ndfeb magnet
bonded ndfeb magnet

Production processing:
production processing of bonded ndfeb magnet

Grade for bonded ndfeb magnet: BNP-3, BNP-6, BNP-8, BNP-8SR, BNP-9H, BNP-10, BNP-11, BNP-12L
Performance of bonded ndfeb magnet:
Parameter
BNP-3
BNP-6
BNP-8
BNP-8SR
BNP-9H
BNP-10
BNP-11
BNP-12L
Br (mT)
450-510
590-650
620-670
620-660
650-700
680-720
700-740
730-770
Br (Gs)
4500-5100
5900-6500
6200-6700
6200-6600
6500-4000
6800-7200
7000-7400
7300-7700
HcbkA/m)
199-263
302-374
390-454
405-470
421-484
413-477
430-493
366-430
HcbkOe)
2.5-3.3
3.8-4.7
4.9-5.7
5.1-5.9
5.3-6.1
5.2-6.0
5.4-6.2
4.6-5.4
Hcj kA/m)
477-597
597-796
636-796
955-1114
915-1034
636-796
636-796
517-637
HcjkOe)
6.0-7.5
7.5-10.0
8.0-10.0
12.0-14.0
11.5-13.0
8.0-10.0
8.0-10.0
6.5-8.0
(BH)max (kJ/m 3)
24-32
44-53.6
60-68
65.6-72
72-80
76-84
80-88
84-92
(BH)max (MGOe)
3.0-4.0
5.5-7.0
8.0-9.5
8.2-9.0
9.0-10.0
9.5-10.5
10.0-11.0
10.5-11.5
Tw/ Celsius degree
120
120
120
160
160
120
120
110
demagnetizing curve:
BN8
bonded ndfeb magnet
BN8SR
bonded ndfeb magnet
BN9H
bonded ndfeb magnet
BN10
bonded ndfeb magnet
BN12L
bonded ndfeb magnet
BNI6SR
bonded ndfeb magnet
Widely applications of bonded ndfeb magnet: stepper motors, brushless motors, DC motors, starter motor, DVD spindle motor, CD-ROM drive.
Bonded ndfeb magnets are mainly for the motor.
Motor manufacturers generally use bonded ndfeb magnet for motor, because of low assembly labor costs
Sintered magnet arc are often assembled piece by piece, glued to the rotor or stator
While, for boned ndfeb magnet, workers just only set bonded ndfeb magnet into rotor or stator after adhesive bonding.
So there is no high requirement of power, not only require great speed, then the motor manufacturers will use bonded ndfeb magnet for the high speed motor. 
Magnetizing method
Skrew-45°,8 Poles on OD, or oblique magnetized bonded ndfeb magnet
bonded ndfeb magnet
radial 2 poles magnetized bonded ndfeb magnet
bonded ndfeb magnet
radial 6 poles magnetized bonded ndfeb magnet
radial 12 poles magnetized bonded ndfeb magnet
radial 12 poles magnetized bonded ndfeb magnet
radial 16 poles magnetized bonded ndfeb magnet
radial 16 poles magnetized bonded ndfeb magnet
radial 24 poles magnetized bonded ndfeb magnet
radial 24 poles magnetized bonded ndfeb magnet
radial multi poles magnetized bonded ndfeb magnet
radial multi poles magnetized bonded ndfeb magnet
radiant magnetized bonded ndfeb magnet
radiant magnetized bonded ndfeb magnet
axial magnetizing bonded ndfeb magnet
axial magnetizing bonded ndfeb magn

surface treament:
Processing Name
Technology Introduction
Scope of application
Processing characteristics
Electrophoresis
By using electrochemical principle, electrophoresis, is currently the most common anti-corrosion surface treatment process of most products
Apply to most products surface treatment

  1. Salt spray test 48h Constant Temperature & Humidity 240h
  2. Good oil and solvent resistance
  3. smooth Surface, beautiful appearance

Roll spray
Using spray principle, the anti-corrosion coating evenly sprayed on the product surface
Specially use to small products whose weight less than 1g, or diameter less than 5mm

  1. Efficient
  2. High Passing rate
  3. High Consistency
  4. Salt spray test 24h, constant temperature wet 240h

Rust oil
the surface of the product uniformly coated layer of rust film, by Dipping method, without changing the dimensions of the case, to improve the rust preventability
particularly suitable for small ring product

  1. Efficient.
  2. Simple processing

Special surface treatment
Penetrate specific glue to product to pores, by using Negative pressure method
suitable for the products that work in the oil or solvent

  1. sealing  Micropore on surface
  2. Increase product strength
  3. Long time work under oil or solvent environment

Wave form:
4-Poles Waveform
bonded ndfeb magnet
10-Poles Waveform
bonded ndfeb magnet
44-Poles Waveform
bonded ndfeb magnet
88-Poles Waveform
bonded ndfeb magnet
Bonded factory pictures:
moulding
moulding
milling
milling
compressing:
compressing:
magnetizing:
magnetizing

没有评论:

发表评论